1: bug/tar removal: spray APC or appropriate bug/tar remover where necessary in order to remove inbedded bug guts/tar from the paint. May also use a clay bar to remove more stubborn contaminants. This step is necessary to prevent acid etching on the clear coat/trim and to enhance the overall look of the vehicle. 

2: Pre-Wash: APC pre-rinse to remove loose dirt, debris or contaminants from the exterior prior to hand washing in order to minimize risk of damage to the paintwork

3: Rims/Tires: Use total wheel cleaner to safely remove accumulated brake dust, oil, dirt, stains and light corrosion from wheel surface and wells. Apply a degreaser to the tires in order to remove tire blooming and restore their factory black appearance. Apply tire dressing if requested by customer 

4: Foam Hand Wash: Vehicle is coated in soapy foam and hand washed with chenille mitts in order to safely remove dirt and other contaminants from all exterior surfaces (door jambs included). grille, gas cap, front bumper and emblems are cleaned with a soft brush in order to remove deeply imbedded dirt and bugs if necessary. 

5: protect, rinse/dry: Rinse soap off the exterior surfaces. Apply gloss/bead amplifying spray sealant to achieve High-gloss and UV protection on all exterior surfaces. Blow and towel dry entire vehicle exterior to ensure all water is removed from body lines that may retain water and perform any final touch ups. 

6: windows: 2 step method used to clean the outside and inside of all glass surfaces, tint safe and ensures that the windows will be streak free. 

7: enjoy your shiny clean vehicle. 

1. preparation: remove any trash or customers belongings prior to starting (excessive trash is subject to extra charge). Center console and glovebox are optional, customer will be consulted with prior to beginning. 

2. blow out + vacuum/extraction: remove floor mats and blow out the entire interior starting from back to front. vacuum any debris that still remains in the vehicle including under the seats and between the center console. Steam/extraction of the floor mats (if applicable) to remove any imbedded dirt and return the mats to oem look and feel. Rubber floor mats will be cleaned and dressed. 

3. wipe down: use interior cleaner and wipe down any interior surfaces that might have accumulated light stains or dirt. Use a soft brush and steam for vents and buttons. 

4. Windows: Spray windows with tint safe glass cleaner in order to remove dirt,  grease or any other contaminants. wipe dry and buff with a microfiber towel to achieve streak free results. 

5: deodorizing: apply an interior fragrance to enhance the overall scent of your vehicle. 

1. Preparation: Before starting, ensure that the engine is cool to the touch. Remove any loose debris such as leaves, dirt, or twigs.

2. Cover sensitive components: Use plastic bags or plastic wrap to cover any sensitive components such as the alternator, fuse box, and air intake system to prevent water damage.

3. Degrease the engine bay: Start by applying a degreaser to the engine bay. Use a brush or sponge to scrub the degreaser into the engine components. Pay close attention to areas with heavy grease buildup, such as the engine block and transmission.

4. Rinse off the degreaser: Use a hose or pressure washer to rinse off the degreaser. Ensure all the degreaser is thoroughly removed from the engine bay.

5. Clean the engine bay: Mix a mild detergent or all-purpose cleaner with water in a bucket. Use a sponge or soft brush to scrub the engine components, hoses, and wires. 

6. Rinse off the soap: Use a hose or pressure washer to rinse off the soap from the engine bay.

7. Dry the engine bay: Use a clean microfiber towel or air compressor to dry off the engine components. Will ensure all water is removed from the engine bay, especially around electrical components.

8. Remove covers: Carefully remove the plastic bags or plastic wrap from the sensitive components that were covered earlier.

9. protection: Apply an engine bay dressing to give the engine bay a shiny, clean appearance. 

Keep your vehicle looking fresh and clean all month long with our convenient monthly detail subscription. Includes all services included in our interior + exterior detail.

1. Thoroughly wash and dry the car to remove any dirt, grime, and debris from the surface.

2. Inspect the paint for any imperfections such as swirl marks, scratches, oxidation, or fading.

3. Tape off any delicate areas such as emblems, trim, or rubber seals to protect them from the polishing process.

4. Use a machine polisher with a polishing pad and a high-quality polish to gently remove imperfections from the paint surface. 

6. After polishing, wipe down the entire surface with a clean microfiber cloth and polish remover to remove any residue and inspect for any remaining imperfections.

7. Apply a coat of wax or sealant to protect the paint and enhance the shine. 

8. Remove the tape from the delicate areas and gently buff the entire surface with a clean microfiber cloth to bring out the shine and remove any leftover residue.

9. Step back and admire the enhanced appearance of the car's paint, which should now be free of swirl marks and scratches with a deep, glossy finish.

10. Regularly maintain the paint with our flawless maintenance which includes proper washing and waxing to preserve the results of the paint enhancement and keep the car looking its best.

1. Preparation: Wash and dry the vehicle thoroughly to remove any dirt, grime, and residues on the surface. clean tires and wheels then apply complimentary tire shine.

2. Decontamination: Use a clay bar/iron remover to remove any embedded contaminants on the paint.

3. Perform a 1 step Polish enhancement on the paint to ensure that the ceramic coating is able to properly adhere to any painted surfaces.

4. Apply ceramic coating to all painted exterior surfaces (not including wheels)

5. Enjoy your shiny and protected vehicle.

1. Preparation: Use a clay bar and headlight lens restorer to remove any imbedded debris, bugs and yellowing of the headlight. 

2. sanding: use any range from 400-3000 grit to remove any imperfections from the surface of the headlight and achieve a smooth finish 

3. polishing: Polish the headlights to achieve a clear, shiny finish to the headlight lens. 

4. protection: apply a ceramic coating so that the restored finish of the headlights may be preserved and protected for up to 2 years.